Richlite Glacier Guitar Fingerboard, 20" long, unslotted

Chocolate Glacier darkens to a rich brownish-black. Subtle layers will be visible as “grain” on the face of a radiused fingerboard in this color.
Dimensions: 20" x 2.75" x 0.3125" (686 x 70 x 8mm)

Low maintenance, minimal shrinkage, and a density that is right in the middle of the range for ebony, there are only advantages to using Black Diamond Richlite on your guitar.

• Acoustically superior and consistent density
• Moisture acclimated and inherently stable
• Durable while maintaining an ebony look and feel
• Hand made in the U.S.A. and FSC® Certified
• Impact resistance and span superior to wood products
• Machines with standard tooling
  

Two-part water-resistant epoxies formulated for thermoset resins or phenolics are recommended for gluing (most other adhesives will not be appropriate for use with Richlite). We suggest System Three T-88 for structural bonding. Loctite E-30CL or Devcon DEV-20845 5-minute epoxy is also acceptable.
Make sure the joint gluing surfaces are roughed-up, 100 grit or less, for better glue adhesion. Do not over-tighten clamps to keep enough glue in the seam.